Chrome-Plated Round Steel - CK45 - --
Important Information for Bar Stock Products
For some pieces, 80-100 mm of the listed length may not be usable due to an uncoated, unchromed surface.
The shipping fee displayed in the Cart and Checkout is for informational purposes only.
For bar stock, the final shipping cost may differ from the estimated amount, depending on the package's specific volume or weight.
If ordering non-full-length bars, a cutting fee is added to the total cost according to the following rates:
| For shaft diameters up to 60 mm | 750 HUF / cut |
|---|---|
| For shaft diameters over 60 mm | 1250 HUF / cut |
| Hardened materials | 1500 HUF / cut |
| Stainless steel materials | 1500 HUF / cut |
| Steel tube | 1000 HUF / cut |
Size Charts and Descriptions of Chrome-Plated Rods
CK45 Chrome-Plated Round Steel Description
Polished and hard chrome-plated round steel.
| Material Grade | CK45 - 1.1191 |
|---|---|
| Tolerance | f7 / f8 |
| Chrome Layer Thickness | <⌀20: min 15 µm, ≥⌀20: min 20 µm |
| Hardness | 63 - 68 HRC |
| Surface Roughness | Ra max. 0.25 µm |
| Straightness | 0.3 mm / 1000 mm |
Mechanical Properties
| Tensile Strength (Rm) | > 560 MPa |
|---|---|
| Yield Strength (Rp 0.2) | > 275 MPa |
| Elongation (A%) | > 14% |
Average Chemical Composition
| C | Max 0.50% |
|---|---|
| Mn | Max 0.80% |
| P | Max 0.030% |
| Si | Max 0.40% |
| V | - |
| S | Max 0.035% |
If you have not purchased bar stock from us before, please fill out the Reverse Taxation Declaration and send it back to us via email.
Please send the document to webaruhaz@ogszhidraulika.hu.
Download